Introduction
Core Composer is mainly used for the production of three-ply board,sandwich board, LVL,floor substrate, furniture panel, building film face board, container board, Melamine Faced Board etc, and it can also be used for the vertical splicing of rotary cut median plate with the thickness of 1.2-3.6mm.this changes the traditional manual decking technology and makes plywood decking unitized and automatically.
Standard Type Core Composer with Veneer Stacker
Specification
|
Driver |
All Servo Motor |
|
Fuselage structure |
Integral steel plate cutting |
|
Conveying speed |
0-35m/min |
|
Capacity |
300pcs/h |
|
Working veneer width |
968-1270 mm (3-4ft) |
|
Cutting veneer length |
1220-2560 mm (4ft, 5ft, 6ft, 7ft, 8ft) |
|
Working veneer thickness |
1.2-3.6 mm |
|
Length of knife |
1400 mm |
|
Length of felt-board machine |
3600mm |
|
Height of felt-board machine |
2500mm |
|
Width of felt-board machine |
2600mm |
|
Length of stacking machine |
4000mm |
|
Height of stacking machine |
2500mm |
|
Width of stacking machine |
2200mm |
|
PLC |
Taiwan Delta |
|
Output |
300-350pcs/hour (4x8ft) |
|
Precursor drive |
3kw INVT Servo Motor |
|
Rear drive |
3kw INVT Servo Motor |
|
Edge cutting drive |
INVT Servo Motor *2 |
|
Waste veneer remove |
Cylinder control |
|
Synchronized docking driver |
Electromagnetic Clutch Brake Unit |
|
Front and rear drive reducer |
Planetary reducer |
|
Front and rear hydrazine reducer |
Planetary reducer |
|
Position control |
Photoelectric and proximity switches |
|
Stacker lifting motor |
2.2kw |
|
Stacker board transporting motor |
1.1kw |
|
Stacker board transporting control |
INVT Invertor |
|
Intermediate Transfer Motor |
0.75kw |
|
Frame |
Steel plate |
|
Overall dimension |
17*3*2.5m |
|
Total weight |
6500kg |
Final Product of horizontal type core composer
Our Machine Advantage
1. Our core composer adopts electromagnetic clutch with synchronous axis, and the front veneer move and pulls the back veneer to avoid the overlapping and veneer stucking. Other manufacturers are servo motors with up and down chain drive, through the chain to move veneer, behind the veneer push the front of the veneer drive, easy to cause veneer stucking.
2. Our core composer has two press wheel. The front one is against to transport gear for transporting core veneer. The behind one is against to cooling wheel for cooling the glue. Two press roller make board connection part more even. But other factory only have one pressure wheel. The transport gear is drived by electromagnetic clutch
3. Five pieces servo motor, 2pcs*3kw servo motor for cutting. 2pcs*3kw servo motor for driving. 1pc*1.1kw servo motor for waste veneer removing. All use Planetary reducer. Other factory only have 2 pieces servo motor for driving. Others are all normal motor.
4. Our machine use two bearing to fix the cutter blade. It can reduce the friction with cutter, so it is more durable. Other factory use copper block to fix blade. It need oil often, and if too tight, the friction is too big. If too loose, it will cause cutting not precise.
5. We add one spring on cutter part, it can reduce noise and shock. So the cutter is more precise and durable.
6. The main drive gear is made of 40 Chromium Manganese Titanium material
7. Glue trough is made of aluminum, better Thermal conductivity than iron. Price is 5-7 times of iron.
8. Gree air condition. Quality guaranteed brand.
Youtube Video Link
Horizontal type core composer
Finger jointing type core composer
