Chuck Veneer Peeling Lathe

Face veneer peeling cutting machinery,Chuck Veneer Peeling Lathe,8ft Wood Face Veneer Peeling Line

 

 

 

 

Spindle rotary chuck	Double rotary chuck
model No.	YSXQ260
Configuration	Invertor+ servo motor
Thickness Setting	CNC control
Max slicing diameter	1500mm
Slicer veneer thickness	0.5mm-6mm
Slicer length	2000mm-2600mm
Peeling speed	50-60m/min (peel 1.5mm)
Main motor	75KW
Feeding motor	7.5KW (Servo motor)
Hydraulic station motor	5.5KW
Blade adjusting motor	1.1KW
Pressure bar motor	1.5KW
Total motor power	70.6KW
Motor	All are Siemens
Remain wood core diameter	120mm
Inverter +PLC+Touch screen	Taiwan Delta
Electronic parts brand	Schneider
Dimension	9300*4000*3400mm
Gross weight	25000kg

 

 

Sinoeuro Hydraulic double chuck peeling machine, during the wood log peeling work, in order to avoid damage the wood log, we specially designed, left chuck diameter is 280mm, right middle diameter is 220mm, small chuck diameter is 110mm and 150mm, when the wood log peeling reach 320mm, in the PLC program we will set, then peeling diameter reach 320mm, the biggest chuck will be back automatically, when peeling wood log reach 260mm, the right middle diameter chuck will be back automatically, when log do the peeling diameter is 110mm, the knife table will go back automatically to max. Openning 1200mm any position, 150mm chuck is only applicable for peeling thickness is 5mm and above 5mm.

 

This machine use the touching screen to control the peeling thickness 0.2mm to 10mm arbitrary adjustment, and in the controlling cabinet, have set thickness 1 and thickness 2, two mode, during the peeling process, It can be switched freely during the spinning process.

 

 

 

 

 

1.We will send our engineer under your indications to your factory for installing, debugging and maintaining, you only need to afford the cost of the flights, and the engineer's accommodation .

2.If you are experienced in installing jobs, we will provide ongoing technical support for you.

Guarantee time for the main parts of the machine will be 12 months, in this period, if the machines itself have the problem, we will freely maintain it, but not including the problem caused by the wrong or rough operation.

3.The buyer sends people to seller's factory for study:

one month and one person. The buyer should pay for the round air fare, and the seller arrange for food and accommodation, and the service including: the machine's fixing, debugging, operating, maintaining.

4.After the warranty, we can also supply the engineer service and the technical service, but you need to pay the salary for the engineer! and afford the cost of the replaced aparts yourself. More service, you can get by send us an e-mail or a fax.