Plywood Machine Veneer Dryer

Veneer dryer machine for veneer peeling and plywood production line is the key section for veneer quality,high quality veneer the essential point is drying. Sun dried veneer, it normally need to dry again and it has deformation, mildew, other quality problems. Veneer machine for veneer and plywood and wooden furniture production.

Veneer dryer machine mainly for drying peeled veneer humidity, and make the dried veneer humidity be suitable for making end products, usually the dried veneer humidity about 5-14% according to each clients requirements.

Roller type veneer dryer. This type best working thickness is above 1.5mm, it is mainly used for core veneer drying. The core veneer will go through two rollers space, and the roller will press and drive the veneer moving, it will make the veneer more flat after drying. Roller type veneer dryer is suitable high capacity factory, the drying length and layer quantity are all customized according to customers' capacity request and workshop size. If your daily capacity is bigger than 50cbm,it would be better to choose roller dryer.

1. Roller: Select φ89mm special shaft pipe, wall thickness 3mm, roller center spacing is 180mm.
2. Jet box: Adopt high-quality GB standard galvanized rectangular tube.
3. Insulation board: The side insulation board has a thickness of 60mm, the panel is 1.2mm galvanized sheet, and the lining is aluminum silicate blanket. The top insulation board has a thickness of 75mm and is lined with rock wool composite board.
4. Sinoeuro veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve an ideal drying effect.
5. The well-developed heat exchange system adopts the step by step heat transfer, and the specifications of each section of the heat exchangers are different. And the hot air in the heat exchanger can be uniformly emitted to the veneer. It fully improves the energy utilization rate and saves unnecessary energy waste. It has obtained the national invention patent.
6. Traction motor: Domestic high-quality electromagnetic speed-regulating motor and speed-regulator.
7. Electric control system: The main electrical components are all selected from domestic brands, the control cabinet layout is reasonable, the appearance is beautiful, and the operation is convenient

8. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.

9. The biomass burner, a patented product independently developed by our company, can directly use crushed tree bark as fuel to provide a heat source for the dryer, which is energy-saving and environmentally friendly, and greatly reduces the drying cost.

10. The hot air blower and the cold air blower of the dryer use the latest axial flow fan 5.5kw, which reduces the power consumption and greatly reduces the power of 35% of the whole machine. It not only fully guarantees the required air volume for drying, but also reduces the total installed power, thus minimizing the electricity consumption of the entire equipment.

11.We have a professional R&D team which can design different models according to customer's special requirement.

Rollers

Jet box/hot air tube

Fan blade

Gear wheel chain wheel

Axial fan of 4deck dryer

Axial fan of 2deck dryer

Traction motor

Roller and hot air tube structure

Control cabinet of the dryer

Control cabinet of automatic veneer loader

4deck dryer main frame

Insulation board(aluminium silicate)

Electronic component

Heat Exchangers of biomass dryer

Welcome your kind inquiry to us!
SINOEURO(SHANDONG)MACHINERY CO.,LTD.
Email:admin@sinoeurocn.com
M/Whatapp/wechat:+86-18653930050